– Kamailio SIP Server –

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
nat:remote-rtpproxy [2012/03/20 16:24] – CuGyOphchNI 109.230.216.225nat:remote-rtpproxy [2012/03/20 19:12] (current) – old revision restored 80.250.1.245
Line 1: Line 1:
 +====== Run RTPProxy on a Remote Host ======
 +
 +
 +RTPProxy can be run on a different machine than OpenSER.
 +
 +For example, if the remote machine has an IP Address of 192.168.1.1 (which isn't the same machine that OpenSER is running on):
 +
 +On the RTPProxy machine start rtpproxy with the following command:
 +
 +/usr/local/bin/rtpproxy -l 192.168.1.1 -s udp:*:12345
 +
 +Note1: 12345 is the port that rtpproxy will listen on. The default, if not specified is 22222.
 +Note2: There is a -f option that will keep rtpproxy in for foreground. This will offer you the ability to watch the execution of rtpproxy in realtime.
 +
 +On the OpenSER machine add the following line to your ser.cfg
 +
 +modparam("nathelper", "rtpproxy_sock", "udp:192.168.1.1:12345")
 +
 +This is just a simple example. More complex configurations are possible by building on the above.
 +
 +
  

Trace: