The Following modules must be loaded before this module:

This module requires the internal IMS library.

For the offline charging (Rf), we have the following two diameter-messages:

Each request can have the following Accounting-Record-Type:

For online charging (Ro), this get's a little bit more complicated. The charging function needs to perform credit control before allowing resource usage. The prepaid subscriber needs to exist in the charging-server and all activities must be monitored by the charging-server. We must distinguish between the following two cases:

As a result, we have the following three scenarios:

But how does it look in reality? Let us make a more practical example:

Let us assume we have a subscriber, who has sufficient credit for 75 seconds of talking. The subscriber initiates a call; as we do not know, how long the call will take, we start with requesting credit for 30 seconds (CCR-Request, we could request any duration, e.g. 2 hours, but it would probably block other calls if we reserve all the required credit).

The call proceeds, so after 30 seconds we send another CCR-Request with the indication that we used the reserved 30 seconds and that we request another 30 seconds. We reduce the account of the subscriber by 30 seconds, so he has a credit of 45 seconds. Since 45 seconds is more than the requested 30 seconds, this second request can also easily be accepted and another 30 seconds can be granted. After this request, the account is at 45 seconds and we still (or again) have 30 seconds reserved.

Meanwhile the subscriber initiates a second call. We try to request again 30 seconds from the charging-server, but as our account is at 45 seconds of speaking time and since we reserved another 30 seconds for the first call, we can only grant 15 seconds for the second call. The last 15 seconds are now reserved for this subscriber; we have 45 seconds on the account of which 45 seconds are reserved.

Now the first call gets terminated: We only used 20 seconds from the granted 30 seconds. So we decrease the account of the subscriber by 20 seconds and we reduce the amount of reserved units by 30. We have 25 seconds in the account and we have still reserved 15 seconds for the second call.

As the second call is still proceeding, we will try to request another 30 seconds and we indicate, that we used the granted 15 seconds. The account is deducted by 15 seconds (the used units) and we can grant another 10 seconds for the second call, as this is the remains on the account.

After 10 seconds, no more units can be granted, so the call is teared down.

The following diagram is a graphical representation of the above example:

The size of the hash table internally used to keep the Diameter-Ro-Session. A larger table is much faster but consumes more memory. The hash size must be a power of two number.

IMPORTANT: If Ro-Session's information should be stored in a database, a constant hash_size should be used, otherwise the restoring process will not take place. If you really want to modify the hash_size you must delete all table's rows before restarting the server.

Default value is 4096.

...
modparam("ims_charging", "hash_size", 1024)
...

Should a database be used to store dialog information.

Available database modes: 0 for no database, 1 for real-time mode and 2 for shutdown mode.

Default value is 0 - no database is used.

...
modparam("ims_charging", "db_mode", 0)
...

Default value is “mysql://kamailio:kamailiorw@localhost/kamailio”

...
modparam("ims_charging", "db_url", "dbdriver://username:password@dbhost/dbname")
...

How much credit should be requested interim request? At the start of the call, we request the amount of seconds as per Command. For each interim request, we would request credit for "interim_update_credits".

Default value is 30.

...
modparam("ims_charging", "interim_update_credits", 600)
...

How many seconds before expiry of our credit should we request more credit?

Default value is 8.

...
modparam("ims_charging", "timer_buffer", 10)
...

FQDN of Diameter Peer (OCS) to use for communication (CCR). If you use this, the routing defined in your diameter xml configuration file (CDP) will be ignored and as a result you will lose the benefits of load balancing and failover.

Default value is ''.

...
modparam("ims_charging", "ro_forced_peer", "ocs.ims.smilecoms.com")
...

This is the expiry length in seconds of the initiated Diameter sessions.

Default value is 7200.

...
modparam("ims_charging", "ro_auth_expiry", 14400)
...

This is a flag to determine whether or slow CDP responses should be reported in the log file. 1 is enabled and 0 is disabled.

Default value is 1.

...
modparam("ims_charging", "cdp_event_latency", 1)
...

This time in milliseconds is the limit we should report a CDP response as slow. i.e. if a CDP response exceeds this limit it will be reported in the log file. This is only relevant is cdp_event_latency is enabled (set to 0).

Default value is 500.

...
modparam("ims_charging", "cdp_event_threshold", 500)
...

This time log level at which we should report slow CDP responses. 0 is ERROR, 1 is WARN, 2 is INFO and 3 is DEBUG. This is only relevant is cdp_event_latency is enabled (set to 0)

Default value is 0.

...
modparam("ims_charging", "cdp_event_latency_log", 1)
...

This tells the module whether it should do a single ro session per dialog no matter how many times Ro_send_CCR is called from the config file or initiate an ro session each time Ro_send_CCR is called. It is useful for IMS charging where you might want to charge for on-net originating and off-net originating calls but always have only a single ro session.

Default value is 0.

...
modparam("ims_charging", "single_ro_session_per_dialog", 1)
...

Origin host to be used in Diameter messages to charging-server.

Default value is "".

...
modparam("ims_charging", "origin_host", "scscf.kamailio-ims.org")
...

Origin Realm to be used in Diameter messages to charging-server.

Default value is "".

...
modparam("ims_charging", "origin_realm", "kamailio-ims.org")
...

Destination host to be used in Diameter messages to charging-server.

Default value is "".

...
modparam("ims_charging", "destination_host", "ocs.kamailio-ims.org")
...

Destination realm to be used in Diameter messages to charging-server.

Default value is "".

...
modparam("ims_charging", "destination_realm", "kamailio-ims.org")
...

This defines a root-element of the Service-Context-Id AVP used in the diameter-message

The Service-Context-Id AVP is of type UTF8String (AVP Code 461) and contains a unique identifier of the Diameter credit-control service specific document that applies to the request (as defined in section RFC 4006 4.1.2). This is an identifier allocated by the service provider, by the service element manufacturer, or by a standardization body, and MUST uniquely identify a given Diameter credit-control service specific document. The format of the Service-Context-Id is:

"service-context" "@" "domain" service-context = Token

The Token is an arbitrary string of characters and digits.

'domain' represents the entity that allocated the Service-Context-Id. It can be ietf.org, 3gpp.org, etc., if the identifier is allocated by a standardization body, or it can be the FQDN of the service provider (e.g., provider.example.com) or of the vendor (e.g., vendor.example.com) if the identifier is allocated by a private entity.

Service-specific documents that are for private use only (i.e., to one provider's own use, where no interoperability is deemed useful) may define private identifiers without need of coordination. However, when interoperability is wanted, coordination of the identifiers via, for example, publication of an informational RFC is RECOMMENDED in order to make Service-Context-Id globally available.

Default value is "32260@3gpp.org".

...
modparam("ims_charging", "service_context_id_root", "calls@kamailio-ims.org")
...

This defines the extension of the Service-Context-Id AVP used in the diameter-message.

Default value is "ext".

...
modparam("ims_charging", "service_context_id_ext", "ext2")
...

This defines Mobile-Network-Code (MNC) of the Service-Context-Id AVP used in the diameter-message.

Default value is "01".

...
modparam("ims_charging", "service_context_id_mnc", "42")
...

This defines the service identifier to be used for charging voice.

Default value is "1000".

...
modparam("ims_charging", "voice_service_identifier", "1000")
...

This defines the rating group to be used for charging voice.

Default value is "100".

...
modparam("ims_charging", "voice_rating_group", "100")
...

This defines the service identifier to be used for charging video.

Default value is "1001".

...
modparam("ims_charging", "video_service_identifier", "1000")
...

This defines the rating group to be used for charging video.

Default value is "200".

...
modparam("ims_charging", "video_rating_group", "100")
...

This defines Mobile-Country-Code (MCC) of the Service-Context-Id AVP used in the diameter-message.

see https://en.wikipedia.org/wiki/Mobile_country_code_(MCC) for details.

Default value is "001".

...
modparam("ims_charging", "service_context_id_mcc", "262")
...

This defines Release of the Service-Context-Id AVP used in the diameter-message.

Default value is "8" (Release 8).

...
modparam("ims_charging", "service_context_id_release", "262")
...

When this parameter is set and the contents of the AVP is not empty, the User-AVP in the Ro-Charging-Request will be based on the this parameter rather than on the P-Asserted or From-Header.

This parameter allows you to setup an AVP with which you can customise the user to be used in the Diameter-Request.

Default value: if not set, P-Asserted-Identity with a fallback to the From-Header is used.

...
modparam("ims_charging", "custom_user_avp", "$avp(from_user)")
...

When this parameter is set and the contents of the AVP is not empty, an Application-Provided-Called Party-Address AVP will be addedd to charging related requests. This is required for special cases e.g. related to roaming for some diameter server.

Default value: if not set, the Application-Provided-Called-Party-Address AVP will be not set.

...
modparam("ims_charging", "app_provided_party_avp", "$avp(app_user)")
...

This parameter can be used to activate or deactivate the addition of Vendor-Specific-Termination-Clause and Vendor-Specific-Termination-Reason AVPs to the requests. To activate set this parameter to 1.

Default value is "0" (deactivated).

...
modparam("ims_charging", "vendor_specific_chargeinfo", 1)
...

To set the ID of the Vendor-Specific information, not implemented right now.

Default value is "10".

...
modparam("ims_charging", "vendor_specific_id", 10)
...

Strip + from subscription id when E.164 format is used. This is according to spec, but this parameter is to keep existing behavior as the default.

Default value is 0.

...
modparam("ims_charging", "strip_plus_from_e164", 1)
...

P-Access-Network-Info is normally relevant for the "orig" scenario where it's extracted from INVITE. This setting instruct Kamailio to include it in "term" scenario too, where it might have been added to the INVITE based on info from a REGISTER. Normally used to start a charging session when the user is roaming.

Default value is 0.

...
modparam("ims_charging", "use_pani_from_term_invite", 1)
...

Defines what should be sent as Node-Functionality (862) in the Diameter Ro request. Possible values are: 0 (S-CSCF), 1 (P-CSCF), 2 (I-CSCF), 3 (MRFC), 4 (MGCF), 5 (BFCF) or 6 (AS)

Default value is 0 (S-CSCF).

...
modparam("ims_charging", "node_func", 1)
...

Perform a CCR on Diameter Ro interface for Charging

Meaning of the parameters is as follows:

This function can be used from REQUEST_ROUTE.

This method is executed asynchronously. See example on how to retrieve return value.

...
  xlog("L_DBG","Sending initial CCR Request for call\n");
    Ro_CCR("RO_ASYNC_TERM_REPLY", "term", 30, "1", "1");
}

route[CHARGING_CCR_REPLY]
  xlog("L_DBG","cca_return code is $avp(s:cca_return_code)\n");
  switch ($avp(s:cca_return_code)) {
    case 1: #success
        xlog("L_DBG", "CCR success - will route message\n");
        route(Finalize_Orig);
        break;
    case -1: #failure
        xlog("L_ERR", "CCR failure - error response sent from module\n");
        sl_send_reply("402","Payment required");
        break;
    case -2: #error
        xlog("L_ERR", "CCR error - error response sent from module\n");
        sl_send_reply("500", "Charging Error");
        break;
    default:
        xlog("L_ERR", "Unknown return code from CCR: [$avp(s:cca_return_code)] \n");
        break;
  }
  exit;
  }
...

Sets the Ro session ID to an AVP for use in the config file

This function can be used from REQUEST_ROUTE or ONREPLY_ROUTE.

...
            Ro_set_session_id_avp();
            xlog("L_DBG","Ro session AVP has been set: $avp(ro_session_id)\n");
...

The number of initial CCRs, i.e., the CCRs that were sent for the initial INVITEs.

The number of CCRs sent within established sessions.

The number of CCRs sent to terminate a session.

Initial CCRs that ended with DIAMETER_SUCCESS response code.

Interim CCRs that ended with DIAMETER_SUCCESS response code.

Final CCRs that ended with DIAMETER_SUCCESS response code.

Initial CCRs that ended with no DIAMETER_SUCCESS response or with some other error during processing.

Interim CCRs that ended with no DIAMETER_SUCCESS response or with some other error during processing.

Final CCRs that ended with no DIAMETER_SUCCESS response or with some other error during processing.

Average CCA arrival time in milliseconds.

Total CCA arrival time in milliseconds.

Number of CCR-Requests, which ran into a timeout.

Number of seconds billed in total.

Number of calls that were killed due to lack of credit.